Laguna Tools MJ8X72E-0130 8” Jointer ECO
The Laguna 8” Wedgebed Jointer ShearTec II Cutterhead is the perfect “step-up” jointer with increased capacity for serious woodworking.The oversized tables provide plenty of support to easily flatten long, wide boards while the large center mounted cast-iron fence allows for maximum stock support when edge jointing.The cast-iron in-feed and out-feed tables feature independent adjustment on dovetail ways.The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing.Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.
This item may qualify for an upto 5% OFF further discount. Check Eligibility.
Laguna Tools MJ8X72E-0130 Specifications:
- Motor: 2HP, 220 Volt, 1 phase,TEFC
- Cutter-Head RPM:5600
- Motor Amperage Rating: 8A
- Adjustment: Wedge-Bed w. Crank
- Max. Width: 8”
- Max. Depth: ½”
- Rabbeting Capacity: ½”
- Knife System: Shear-TecII
- 4 Sided Carbide 6 Row X 9 = 54
- Cutter-Head Diameter: 3”
- Table Dimensions: 8” X 75”
- Fence Dimensions: 4-5/8” X 38”
- Fence Tilt: 45 Degree. 90 & 45 Positive Stop
- Table Height: 32”
- Dust Port: 4”
- Wheel System: Built-In
- Weight (Net/Ship): 510/600 Lbs.
Model# | MJ8X72E-0130 |
---|---|
Brand | Laguna Tools |
Log In