Jet 311440 EVS-1440B EVS Lathe 3HP, 230V, Single or 3 Phase

Jet 311440 Features:

• V-way bed design is induction hardened and ground
• Splined, not keyed, shafts are utilized
• D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
• Independent leadscrew and feed rod
• Adjustable gibs are incorporated in the carriage and slideways
• Class 7 precision taper roller bearings keep spindle run out to a maximum of 0.0004"
• Meehanite castings retain their tolerance and remain rigid through many years of machining
• Safety on/off switch
• Emergency Stop within easy reach of the Operator
• Electronic Chuck Key Docking Station
• Chuck Guard
• Foot Brake
• Two speed gearbox allows low speeds from 40-365 RPM to high speeds from 220-2000 RPM
• LED RPM readout allows for precise turning speeds
• Spindle actuation control is apron mounted
• Gap bed section provided for larger diameter work
• Compound and cross slide have backlash elimination
• Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
• Front removable chip tray
• Spindle jog button for easy gear engagement and spindle inching
• Coolant system
• Integrated locking tool storage cabinet in the stand
• Full length splash guard
• Standard Accessories
• 6" 3-Jaw Chuck
• Treading Dial Indicator
• Coolant Pump
• Steady & Follow Rest
• Metric Change Gears
• LED Work Lamp

Jet 311440 Specifications:

• Swing Over Bed (In.) : 14
• Swing Over Cross Slide (In.) : 9-1/16
• Swing Through Gap (In.) : 19- 1/2
• Length of Gap (In.) : 9-1/2
• Distance Between Centers (In.) : 40
• Spindle Bore (In.) : 1-1/2
• Spindle Mount : D1-4
• Number of Spindle Speeds : Variable
• Range of Spindle Speeds (RPM) : 40-2000
• Spindle Taper with Sleeve : MT-5
• Number of Longitudinal and Cross Feed Rates : 25
• Range of Longitudinal Feeds (IPR) : 0.0016-0.0460
• Range of Cross Feeds (IPR) : 25
• Number of Inch Threads : 34
• Range of Inch Threads (TPI) : 2-56
• Number of Metric Threads : 34
• Range of Metric Threads : 0.5-12
• Max Tool Size (In.) : 3/4 x 3/4
• Compound Slide Travel (In.) : 3-1/2
• Cross Slide Travel (In.) : 7
• Tailstock Spindle Travel (In.) : 6-1/8
• Taper in Tailstock Spindle : MT-3
• Follow Rest Capacity (In.) : 0.35 - 2.2 Cooper Shaft (standard ) 0.393 - 2 Bearing Roller(OP)
• Steady Rest Capacity (In.) : 0.23-0.61 Copper Shaft ( Standard) 0.20-2.36 Bearing Roller(OP)
• Width of Bed (In.) : 7.48
• Motor (HP) : 3HP, 230/460V, 3Ph
• Overall Dimensions (L x W x H) (In.) : 68.5 x 28.3 x 50
• Shipping Dimensions (L x W x H) (In.) : 76 x 30 x 61