Bosch CM8S 8 Inch Single Bevel Slide Miter Saw
No reviews
The Bosch CM8S 8-1/2 inch Single Bevel Sliding Compound Miter Saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity. Accessible controls make it easy to change bevel settings without reaching behind the saw. Provides quick and accurate cuts the CM8S also has the same crosscut capacity (12-3/4 in.) as a 10 in. miter saw, at 30% the weight.
Categories: Miter Saws, Miter Saws
Special Price
$513.35
was
$540.38
5% OFF
You save $27.03
Model# CM8S
SKU
000346450248
This item may qualify for an upto 5% OFF further discount. Check Eligibility.
Bosch CM8S Miter Saw Miter Saw Features:
- Ultimate portability - Bosch exclusive design delivers a well-balanced saw with a top carry handle, and a weight of only 37 lbs. easily provides one-handed portability on and off the job
- Easy access bevel controls - bevel lock lever and bevel turret stops are located on side of tool for quick and easy adjustments
- Integrated expanding base extensions - expands up to 29 In. left to right for additional work-piece support
- Large easy-to-read miter and bevel scales - uniform marks from 52 Degree left to 60 Degree right with 10 adjustable miter detents set at most common cuts
- Adjustable front stabilizing foot - maintains saw stability when performing slide cuts allowing maximum capacity: cross cut 12-1/4" at 0 Degree, 8" at 45 Degree, 2-3/4" upright, 3-1/2 crown
- Miter detent override - intuitive easy to access thumb-actuated override
- Ergonomic ambidextrous trigger handle - form fitting handle provides comfort for all day use
- Clear lower guard - for unobstructed view throughout the cut
Bosch CM8S Specifications:
- Amperage: 12
- Bevel Angle Range: -2° to 47°
- Bevel Stops: 0°, 22.5°, 33.9°, 45°
- Blade Diameter: 8.5
- Blade Size: 8-1/2”
- Blade Type: 8-1/2 In. 48 Tooth Carbide Tipped Blade
- Blades Included: 1
- Case Type: No Case Included
- Category: Compound Miter Saws
- Certifications: cULus
- Cliplister ID Request Key: CM8S
- Contents: Saw, (1) 48T Carbide Tipped Blade, Dust Bag, Blade Wrench
- Cord Length: 6 ft
- Crown Molding - Angled Against Fence: 3-1/2"
- Cutting Capacity 0° Miter 0° Bevel: 2”x12-1/4”
- Cutting Capacity 45 Degree Miter: 2" x 6"
- Cutting Capacity 90 Degree Crosscut: 2" x 12-1/4"
- Dust Collection: Yes
- Electric Motor Brake: No
- External Motor Brush Access: No
- Height: 18"
- Height of Table from Base Feet to Tabl: 2.44
- Length: 32"
- Material number NA: 0601B19112
- Max. Base Molding Against Fence: 2-3/4 In.
- Max. Crown Molding (38° Spring) Angled: 3-1/2 In.
- Max. Crown Molding (45° Spring) Angled: 3-3/4 In.
- Max. Cut Capacity - 0° Miter 0° Bevel: 2.75 In. x 12-1/4 In. (Can cut 2x12 Dimensional Lumber)
- Max. Cut Capacity - 0° Miter 45° Left: 1-1/2 In. x 12-1/4 In. (Can cut 2x12 Dimensional Lumber)
- Max. Cut Capacity - 0° Miter 45° Right: Not possible
- Max. Cut Capacity - 45° Miter 0° Bevel: 2.75 In. x 8 In. (Can cut 2x8 Dimensional Lumber)
- Max. Cut Capacity - 45° Miter 45° Left: 1-1/2 In. x 8 In. (Can cut 2x8 Dimensional Lumber)
- Max. Cut Capacity - 45° Miter 45° Righ: Not possible
- Max. Motor HP: 0
- Maximum RPM - No Load: 5600
- Miter Angle Range: 52° Left, 60° Right
- Miter Detents: 0°, 15°, 22.5°, 31.6°, 45°, (Left/Right) 60°, (Right)
- Miter Positive Stops: 0°, 15°, 22.5,° 31.6°, 45° (Left/Right), 60° (Right)
- MSRP - USD: 449
- Name: CM8S
- No Load RPM: 5,600
- Preset Bevel Angle Detents (°): 0° & Left 22.5° & 45°
- Provantage: Y
- Saw Drive: Direct Drive
- Service Baretool Numbers: 3601M19110
- Service Baretool Numbers: 3601M19111
- Spindle Lock: Yes
- UPC code NA: 000346450248
- Voltage: 120V
- Warranty: Limited 1 Year
- Weight: 37 lb
- Width: 18"
Bosch CM8S Includes:
- (1) CM8S 8-1/2 In. Single-Bevel Slide Miter Saw
- (1) 8-1/2 In. 40-Tooth Carbide-Tipped Blade
- (1) Blade Wrench
- (1) Dust Bag Assembly
- (1) Toolless Work Piece Clamp
| Model# | CM8S |
|---|---|
| Brand | Bosch |
Log In