Big Horn 70165 Bore Master Door Lock Installation Kit with Door Holder
Big Horn 70165 Bore Master Door Lock Installation Kit with Door Holder. This kit is supplied with door boring fixture that is adjustable from 2-3/8” to 2-3/4” backset positions and for wood doors as thin as 1” to 2-1/2” thick includes a bushing and a reducer ring.
This all wood door holder is self-adjusting for doors as thin as 1" or as thick as 2-1/4", it uses a simple wedge design to adjust for door thickness and clamps firmly onto the door to prevent the door from moving while you are planning, routing for hinge mortises or lock installation preparation. The wedge design will not allow the tool to open, unlike spring loaded or gravity activated metal door holders. Height of tool from the floor to the top is 20" and the base is a full 24" x 11" with the feet extended so there’s no tipping over while you're trying to insert a door.
Replaces:
- Templaco BJ-115-C3
- Templaco WD-2
This item may qualify for an upto 5% OFF further discount. Check Eligibility.
Features:
- Kit includes three Carbide Tipped Spur Bits for boring 1” edge-bore and 2-1/8” cross-bore and the 1-1/2” cross-bore for dead bolts along with a quick release adapter
- Also includes Latch and Strike templates for a finish mortise
- 3 center locators also included along with a center marker
- Include Self-Adjusting Door Holder
- Features wedge design to adjust for door thickness of 1" to 2-1/4"
- Damage free application prevents scratching and gouging
- Instant in and out feature saves time
- Fold-a-way feet enables a firm and stable work surface
- Extended feet prevent tipping over while working on the door
- Comes in a nice blow molded case
Kit Includes:
- 70130 - Door Boring Jig
- 70150 - Self-Adjusting Door Holder
- 70151 - 1" Carbide Tipped Spur Bit - 1/2" Shank with 3/8" Hex End
- 70152 - 1-1/2" Carbide Tipped Spur Bit - 1/2" Shank with 3/8" Hex End
- 70153 - 2-1/8" Carbide Tipped Spur Bit - 1/2" Shank with 3/8" Hex End
- 70131 - "A" Latch Template - Finish Size 1-Inch x 2-1/4-Inch
- 70132 - "A" Strike Template - Finish Size 1-Inch x 2-1/4-Inch
- 70133 - "B" Latch Template - Finish Size 1-1/8-Inch x 2-1/4-Inch
- 70134 - "B" Strike Template - Finish Size 1-1/8-Inch x 2-3/4-Inch
- 70135 - Center Locator, 1-Inch x 2-1/4-Inch
- 70136 - Center Locator, 1-1/8-Inch x 2-1/4-Inch
- 70137 - Center Locator, 1-1/8-Inch x 2-3/4-Inch
- 70140 - Reducer Ring, Standard 2-1/8" to 1-1/2"
- 70142 - Center Marker, for 1" Latch Bore with Stainless Steel Point
- 70143 - Quick Release Adapter
- 70154 - 90° Spring Loaded Corner Chisel - Premium Small
- 70147 - Red Blow Molded Carrying Case
| Model# | 70165 |
|---|---|
| Brand | Big Horn |
| CA Prop 65 |
Log In