Baileigh BP-5060NC 220V 3Phase 50 Ton Hydraulic Press Brake. Distance Between Housings is 49 Inch
No reviews
With its 6,000-pound steel frame, this hydraulic press brake makes crisp bends across its full 61” width. The stroke and back gauge are tied to encoders with DROs for precision.
Categories: Press Brakes, Brakes, FLAT 5% OFF
Free Shipping
$52,999.00
Model# 1000824
SKU
731325394504
This item may qualify for an upto 5% OFF further discount. Check Eligibility.
Baileigh BP-5060NC Hydraulic Press Brake Features:
- Delivers up to 50 tons of pressure.
- Maximum capacity of .118” thick sheet metal across the machine’s full width.
- 5 hp main motor requires 220-volt 3-phase power.
Powerful, Easy-to-Use Hydraulic System
- Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production.
- 2 encoder-controlled hydraulic cylinders move the top beam.
- Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time.
- It takes a just few seconds to change the top beam pressure and the top position of the stroke (for more or less travel).
- You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend keeps its shape.
- 2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam.
- Foot pedal brings the stroke up and down, leaving your hands free to position the material.
- Motorized back gauge rides on a solid ball screw trolley mechanism.
- Back gauge encoder shows its position on its own DRO.
- Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine.
Rigid Structure and Low Maintenance
- Heavy electrowelded frame, made of solid plate steel, keeps this press brake accurate and running smoothly in production for many years.
- Upper beam rides on a hardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high
- accuracy between both dies at any position of the stroke.
- Includes a set of hardened single-Vee American tooling.
- Accepts standard press brake tooling, giving you a wide variety of options.
- Comes with front material rests (or support arms), which some competing machines do not include.
- 6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam.
- 4 grease zerks let you add oil every few months.
- Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months.
Baileigh BP-5060NC Specifications:
- Item Number: BP-5060NC
- Gauge Length: 17201
- Return Speed: 2.36" / sec.
- Maximum Pressure: 50 tons
- Oil Capacity: 28 gal
- Throat Depth: 7.87"
- Bending Capacity Max Length Max Thickness: 61" / .118"
- Stroke Distance: 5.9"
- Approach Speed: 3.14" / sec.
- Back Gauge Motor: 1/2 hp
- Bending Speed: .275" / sec.
- Main Motor: 5 hp
- Distance Between Housings: 49.21"
- Distance From Table To Ram: 11.81"
- Power: 220V / 3-phase
- Shipping Weight: 6160lbs
- Shipping Dimensions (Inches): 90x63x96
Model# | 1000824 |
---|---|
Apply Add To Quote | Yes |
Brand | Baileigh |
Log In