Baileigh 1007837 SW-84 220V 3 Phase Dual Operator 84 Ton 5 Station Ironworker
The SW-84 hydraulic iron worker is a great way to step up to a dual operator ironworker. This machine puts out a little more tonnage on the punch station than the SW-62, a whopping 84 tons to be exact. But the shearing and notching station is where the SW-84 really begins to shine. These stations put out a whopping 110 tons of force, almost double what the largest single operator machine puts out. This really comes in handy when you have larger stock to shear. But the best part of the SW-84 is the increase you will see in productivity, it allows two operators on each end of the machine to work simultaneously without loss of power at either station.
The SW-84 has five work stations, these include punching, notching, flat bar shearing, angle shearing, and bar shearing. The SW-84 uses all vertical movement to perform functions at all five stations. The advantage to the vertical movement is less material waste due to less clearance being needed and punch tooling will last longer as the stress is spread out over the entire circumference of the punch instead of just one edge.
The fully welded frame on the SW-84 adds to the overall rigidity on the machine which makes it more accurate and will hold its tolerances better than other machines on the market. Other great features of the SW-84 are an electric back gauge, swing away stripper, oversized work tables, foot pedal operation, and waste buckets.
This item may qualify for an upto 5% OFF further discount. Check Eligibility.
Baileigh 1007837 Features:
- Runs on 220-volt 3-phase power.
- Packs 84 tons of pressure at the punch station and a whopping 110 tons of force at the shearing and notching station.
- 5 integrated workstations each execute a different function: punching, flat bar shearing, angle shearing, bar shearing, and rectangle notching.
- 2 operators can work at the same time at different stations without losing power at either station.
- Uses pure vertical hydraulic movement at all stations for clean, deformation-free results.
- You can set the electric backgauge and adjustable stops to deliver repeatable results for production runs.
- Our patented swing-away material stripper saves time by allowing for fast punch tooling changes.
- Oversized work tables split into 2 pieces so that you can punch angle iron and unusually-shaped materials without difficulty.
- Foot-pedal and large-button panel provide simple and convenient operator control.
- Includes 7 punch and die sets to handle a variety of materials.
- Tooling options, such as press brake, pipe notcher, channel, and I-beam shear attachments, are available.
- Electro-welded steel frame adds to the SW-84’s overall rigidity, maintaining exacting standards of accuracy and helping the unit hold its tolerances.
- Baileigh backs this machine with a 1-year parts warranty and lifetime technical support.
Baileigh 1007837 Specifications:
- Round Bar Shear: 1.75"
- Rectangle Notcher: W x D x T: 2" x 3.5" x .5"
- Single Vee Press Brake L x T: 9.75 mm x 5/8"
- Punch Capacity: 1.1" x .866"
- Punching Pressure: 84 Tons
- Pipe Notching: 4.488"*
- Multi Vee Press Brake L x T: 19.6" x .25"*
- Notching Working Height: 44"
- Throat Depth: 12.2"
- Vee Notcher Side x Side x T: 3.5" x 3.5" x .5"*
- Square Bar Shear: 1.75" x 1.75"
- Bar Shearing Working Height: 48.2"
- Angle Shearing Working Height: 43.5"
- Angle Shearing at 90°: 5.1" x 5.1" x .5"
- Angle Bending: 4" mm x .315"*
- Angle Flange Trim: 3.9"
- Blade Length: 16.1"
- Large V Notcher Side x Side x T: 5.7" x 5.7" x .39"*
- Max. Stroke Length: 3.953"
- Diameter x Thickness: 2" x .5"
- Cycles / Min.: 38 @ .591"
- Flat Bar Shearing: 15.75" x .63"
- Flat Shearing Working Height: 33.5"
- Shipping Dimensions (Inches): 96x48x89
| Model# | 1007837 |
|---|---|
| Brand | Baileigh |
Log In