Powermatic 1791293 OES9138, 3HP, 3Ph, 230V/460V Oscillating Edge Sander (Woodworking)
No reviews
Powermatic 1791293 Model OES9138, 3HP, 3Ph, 230V/460V (Woodworking). The large 11-3/4 Inch x 48 Inch table on the OES9138 oscillating edge sander travels a full 8 Inch in vertical height to accommodate most woodworking pieces. It will also tilt negative 5 Degree and out to positive 45 Degree. The cast iron platen is a generous 48 Inch x 9-1/2 Inch and covered with graphite for production sanding, offering super support and cooler running to extend belt life. With 24 oscillations per minute you can use the entire belt face without burning.
Categories: Vertical Edge Sanders, Vertical Edge Sanders, Edge Sander, Edge Sanders, Sanders, Sanders, Sanders, Sanders
Free Shipping
$6,599.99
Model# 1791293
SKU
662755485572
This item may qualify for an upto 5% OFF further discount. Check Eligibility.
Powermatic 1791293 230 Volt Edge Sander Features :
- 3HP motor with 9" x 138-3/4" abrasive belt handles large workpieces
- Oscillates 24 cycles per minute for better finish and longer belt life
- 9-1/2" x 48" platen with graphite pad offers largest work surface in its class
- Rugged bearing-assisted tensioning device for fast belt changes and quick adjust tracking
- Pedestal control switch for easy access
- Large 11-3/4" x 48" front worktable with 8" vertical travel and 45° tilt, includes miter head for angle work
- Precision balanced 9" diameter drive drum and 4" diameter rubber coated idler pulley for positive drive and rigid tracking
- Large radius end table has 6" vertical travel and 45° tilt for any angle and working height needed
- Heavy-duty oscillating gearbox and shaft for long maintenance-free use
- Hinged guard opens for infinite length sanding
- Dual dust collection ports keep work area clean and extend abrasive belt life
Powermatic 1791293 3 HP Sander Specifications:
- Belt Size (W x L): 9 x 138 3/4 Inch
- Electrical Controls: Magnetic starter
- Belt Speed: 3542 sfpm
- Table Size (L x W): 48 x 11 3/4 Inch
- Drum Diameter: 4 Inch Outboard, 9 Inch Drive
- Table Tilt: 5 ° in, 45 ° out
- Platen Size: 9 1/2 Inch x 48 Inch
- End Table Size: 18 Inch radius
- End Table Tilt: 40 ° in, 45 ° out
- Table Working Height: 34 1/2 to 40 3/4 Inch
- Dust Port Outside Diameter: 4 Inch
- Dust Collection Minimum CFM Required: 1100 cu.ft/min
- Fence (L x H): n.a.
- Oscillations Per Minute: 24
- Motor Power: 3 HP
- Motor Phase: 3 Ph
- Motor Voltage: 230 V
- Prewired Voltage: 230 V
- Model Number: OES9138
- Overall Dimensions: 83 x 32 x 50
- Height: 50 Inch
- Width: 32 Inch
- Length: 83 inch
Powermatic 1791293 Includes :
- Two 4" dust ports
- Tilting main and end tables
- Platen with graphite pad
| Model# | 1791293 |
|---|---|
| Brand | Powermatic |
Log In