Jet 321571 GH-1880ZX, Large Spindle Bore Lathe With 2-Axis Newall DP700 DRO With Taper Attachment

Jet 321571 GH-1880ZX Lathe Features:

• Uniquely designed exclusively by JET
• ISO 9001 certified manufacturer
• 3-1/8” bore spindle is supported by two tapered and one ball bearing
• Chrome molybdenum headstock gears are hardened, ground and shaved
• Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required
• Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
• T-slotted compound slide featuring four-way tool post
• One piece cast iron base absorbs vibration allowing heavier cuts
• High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground
• Removable gap allows up to 23-5/8” diameter work on 16”, 27-1/2” on 18”
• Five position automatic carriage stop increases productivity
• Attractive chrome levers, dials and knobs complete this impressive package
• Tolerance test certificate included
• 10” 3 jaw chuck with top reversing jaws
• 12” 4 jaw chuck
• 16” face plate
• Four-way tool post
• Follow rest
• Large capacity steady rest
• Fully integrated coolant system
• Full length splash guard and coolant return
• Large easy to use foot brake
• Articulating halogen work lamp
• Centrally located controls with jog button
• Threading dial
• Mounting pads and levelers

Jet 321571 Specifications:

• Swing Over Bed (In.): 18
• Swing Over Cross Slide (In.): 11
• Swing Through Gap (In.): 27-1/2
• Length of Gap (In.): 12-1/4
• Distance Between Centers (In.): 80
• Spindle Bore (In.): 3-1/8
• Spindle Mount: D1-8
• Spindle Taper with Sleeve: MT-7 (MT-5)
• Number of Spindle Speeds: 12
• Range of Spindle Speeds (RPM): 25 - 1,800
• Number of Longitudinal and Cross Feed Rates: 122
• Range of Longitudinal Feeds (IPR): .0015 - .0913
• Range of Cross Feeds (IPR): .0006 - .0365
• Number of Inch Threads: 61
• Range of Inch Threads (TPI): 1-5/8 - 72
• Number of Metric Threads: 24
• Range of Metric Threads: .05 - 20
• Max Tool Size (In.): 1 x 1
• Compound Slide Travel (In.): 5-1/8
• Cross Slide Travel (In.): 9
• Carriage Travel (In.): 75
• Tailstock Spindle Travel (In.): 5
• Taper in Tailstock Spindle: MT-5
• Steady Rest Capacity (In.): 3/8 - 7
• Follow Rest Capacity (In.): 1/2 - 3-1/2
• Width of Bed (In.): 13-3/8
• Motor (HP): 7-1/2
• Prewired (V.): 230