Delta 36-L352 10 Inch Unisaw with 52 Inch Biesemeyer Fence System
The legendary UNISAW has been redesigned from the ground up and is loaded with industry firsts. Like a conveniently located push-button arbor lock for quick, easy blade changes. Or a tool-free, split-design guarding system with a true rise and fall riving knife for through and non-through cuts. There’s even a BIESEMEYER Fence accurate to 1/64". A single-cast trunnion system results in incredible vibration control providing continuous smooth operation and dependable accuracy. The bi-level dust extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection
This item may qualify for an upto 5% OFF further discount. Check Eligibility.
Delta 36-L352 Unisaw Features:
- Single-Cast Trunnion System results in incredible vibration control providing continuous smooth operation and dependable accuracy
- Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
- The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4 degree
- The Cabinet Construction consists of a large cast-iron base providing stability and solid footing
- True American Marathon Motor provides added power and is available in both 3 and 5 HP
- Improved Table-Top Geometry provides more surface area to stabilize the product and offers outstanding smoothness and superior ease
- The Largest Blade Opening in class makes fine tuning your riving knife and blade changes easier than ever without scraping up your skin
- The Push Button Arbor Lock makes the blade changing process simple and more natural with the use of only 1 wrench, without busting your knuckles
- Large, Easy to Access ON/OFF switch is multi-directional and can be activated from any angle. Its mounting bracket is more solid and sturdy for those times when turning it off with a knee or a foot is necessary
- Smart Storage provides simple and accessible storage for 5 saw blades, 2 riving knives, an arbor nut flange, and the entire rise-and-fall split guard assembly. There is also adequate room for a push stick, arbor wrench with extra-long handle, and standard throat plate
- Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection
- Tool-Free Split Guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools
- BIESEMEYER Fence System provides hairline pointer and built-in tape allowing you to make precision set-ups, cut after cut. 9-ply fence faces have improved tolerances like no other as well as an improved cam front lock lever for an overlock with a curved edge
Delta 36-L352 Specifications:
- Horsepower: 3-HP
- Voltage: 230V
- Phase: 1-Phase
- Hertz: 60-Hz
- Arbor Size: 5/8"
- Blade Diameter: 10"
- Blade Speed: 4,300-RPM
- Max Rip To Right Of Blade: 52"
- Max Rip To Left Of Blade: 13-1/2"
- Depth of Cut at 45°: 2-1/8"
- Depth of Cut at 90°: 3-1/8"
- Distance - Front of Table to Center of Blade: 18-1/2"
- Distance - Table in Front of Saw at Max Depth of Cut: 13-1/2"
- Max Width of Dado: 1-1/8"
- Miter Gauge Groove: 3/8" x 3/4"
- Chip Exhaust Opening: 4" and 5"
- Table Height: 35"
- Table Size of Cast Iron Top (with wings only): 31" x 40"
- Table Size with BIESEMEYER® Table, Wing & Laminate Board: 31" x 82"
- Length: 87"
- Width: 37"
- Width with Fence on Saw: 46"
- Height: 35"
- Weight: 661 lbs.
Model# | 36-L352 |
---|---|
Brand | Delta |
Log In