Promo 1Makita Promo

Baileigh WR-84V-ATC 220V 3Ø 4'x8' CNC Router Table, Vacuum Table w/ Pump, 10HP Spindle, 4pc ATC, and Software Package

This large CNC router table can automatically change tooling in just 8 seconds. You can program profile switches right into your design to save time and maintain precision during industrial production runs.
Free Shipping
$45,164.00
Model# 1022028
SKU
731325495584

This item may qualify for an upto 5% OFF further discount.  Check Eligibility.

Baileigh WR-84V-ATC CNC Router Table Features:

  • Large 4’ x 8’table.
  • Arrives pre-built with correct alignment. No complicated set-up process.
  • Comes with software for plotting out designs on your computer, then turning them into cut patterns for the machine.
  • Runs on 220-volt 3-phase power.
  • Powerful 10hp spindle can tackle hard materials without flinching.
  • 7.5 kilowatt air-cooled spindle will stay accurate through years of production.
  • Variable spindle speed, from 3000 to 24,000 rpm.
  • Servo motors ensure smooth running at both fast and slow speeds.
  • High gantry is up and away from material, allowing you to see what it’s doing.
  • Y axis moves far enough for the gantry to clear the table. You can take the material directly off; no need slant it awkwardly.
  • Upload your design to the table with a USB drive. Automatic tooling changes let you swap out bits with computer-controlled precision. Sensor compensates for the change in tool lengths. That change might seem tiny, but it makes a huge difference to the finished product.
  • Pre-load up to 4 collets with your chosen profiles; the router will switch between them as programmed.
  • Powerful 7hp vacuum in the bed of the table holds the material in place during the cutting process.
  • 4 vacuum zones allow you to turn on the valve only for the area where you’re working.
  • Arrange each zone’s vacuum seal into the shape of the material to provide well-distributed suction.
  • Dust shroud fits over the spindle; you can vacuum out all the dust and chips while you’re cutting.
  • Fully-welded steel frame keeps the machine stable, helping the router last longer and preventing vibrations from taking the cut off-course.

Baileigh WR-84V-ATC Specifications:

  • Item Number: WR-84V-ATC
  • Shipping Weight: 4800lbs
  • Actual Working Area: 96.5" x 50.5"
  • Speeds: 7 (3,000 - 6,000 - 9,000 - 12,000 - 15,000 - 18,000 - 24,000 rpm)
  • Spindle: Air Cooled
  • Z Axis Stroke: 8"
  • Maximum Moving Speed (Inches Per Minute): 394
  • Maximum Engraving Speed (Inches Per Minute): 394
  • Reposition Accuracy: 0.0019
  • Tool Diameters: 1/8”, 4mm, 6mm, & 12mm
  • Power: 220V Three Phase
  • Length: 132"
  • Width: 83"
  • Height: 70"
  • Horse Power: 10
  • Weight (lbs): 4800
  • Table Style: Vacuum
  • Notes: Applicable Materials - Acrylic, Copper, Aluminum, Wood, PVC, ABS, Insulation Plate, Bakelite Plate, Honeycomb Plate, Resin, Organic Board, Aluminum Composite Panel
  • Shipping Dimensions (Inches): 144x82x81
Model# 1022028
Brand Baileigh