Baileigh WR-105V-ATC 220V 3Ø 5'x10' CNC Router Table, Vacuum Table, 12HP HSD Spindle, 6pc ATC, and Software Package

Baileigh WR-105V-ATC CNC Router Table Features:

• Large 5’ x 10’table.
• Arrives pre-built with correct alignment. No complicated set-up process.
• CNC wood router table comes with software for plotting out designs on your computer, then turning them into cut patterns for the machine.
• This industrial router machine runs on 220-volt 3-phasepower.
• Powerful 12hp spindlecan tackle hard materials without flinching.
• 9 kilowatt air-cooled spindlewill stay accurate through years of production.
• Variable spindle speed, from 0 to 24,000 rpm.
• Servo motorsensure smooth running at both fast and slow speeds.
• High gantry is up and away from material, allowing you to see what it’s doing.
• Y axis moves far enough for the gantry to clear the table. You can take the material directly off; no need slant it awkwardly.
• Upload your design to the table with a USB drive. Automatic tooling changes let you swap out bits with computer-controlled precision. Sensor compensates for the change in tool lengths. That change might seem tiny, but it makes a huge difference to the finished product.
• Pre-load up to 6 collets with your chosen profiles; the router will switch between them as programmed.
• Powerful 7hp vacuum in the bed of the wood router machine holds the material in place during the cutting process.
• 4 vacuum zonesallow you to turn on the valve only for the area where you’re working.
• Arrange each zone’s vacuum sealinto the shape of the material to provide well-distributed suction.
• Dust shroudfits over the spindle; you can vacuum out all the dust and chips while you’re cutting.
• Fully-welded steel framekeeps the machine stable, helping the router last longer and preventing vibrations from taking the cut off-course.

Baileigh WR-105V-ATC Specifications:

• Item Number: WR-105V-ATC
• Shipping Weight: 5500lbs
• Actual Working Area: 118" x 59"
• Speeds: Variable
• Spindle: Air Cooled
• RPM: 0-24000
• Z Axis Stroke: 8"
• Maximum Moving Speed (Inches Per Minute): 2362
• Maximum Engraving Speed (Inches Per Minute): 984
• Reposition Accuracy: 0.0015
• Tool Diameters: er32
• Power: 220V Three Phase
• Length: 140"
• Width: 110"
• Height: 89"
• Horse Power: 12
• Weight (lbs): 3200
• Table Style: Vacuum
• Notes: applicable Materials - Acrylic, Copper, Aluminum, Wood, PVC, ABS, Insulation Plate, Bakelite Plate, Honeycomb Plate, Resin, Organic Board, Aluminum Composite Panel
• Shipping Dimensions (Inches): 154x98x80 & 41x23x19