Baileigh SH-5210-HD 220V 3Phase Heavy Duty Hydraulic Shear. 52 Inch Length 10 Gauge Mild Steel Capacity
No reviews
With its welded steel frame, this hydraulic sheet metal shear offers a long lifespan of use cutting thick materials for high production. The adjustable blade gap and rake angle ensure quality cuts.
Categories: Shears, Shears, FLAT 5% OFF
Free Shipping
$29,839.00
Model# 1007122
SKU
731325413700
This item may qualify for an upto 5% OFF further discount. Check Eligibility.
Baileigh SH-5210-HD Heavy Duty Hydraulic Shear Features:
- 52” length.
- 10 gauge mild steel maximum capacity.
- Minimum capacity of 24 gauge mild steel.
- 7.5 hp motor runs on 220-volt 3-phase power.
- Industrial-grade hydraulic system is located in the front for easy fluid changes.
- 35 to 47 strokes per minute for speedy production.
- Shearing carriage rides on hardened ways and uses heavy-duty bearings to reduce friction.
- Manually adjustable 23.62” backgauge ensures precise repeatability.
- Heavy duty table with roller bars slides material into the machine more easily.
- Side gauges keep the cut at 90° (if you so choose) without you needing to make a guiding line on the material.
- Switch between 3 modes as needed:
- Jog mode: Inching the blade down to the material.
- Single cycle mode: One cut for one pedal push.
- Automatic cycling mode: Continuously cutting for production runs.Adjustable rake angle dial makes it easy to
- fit your material thickness to minimize burr and put less strain on hydraulics.
- Convenient blade gap adjustment lets you eliminate folding and twisting.
- Comes standard with high carbon chromium blades.
- 2-sided upper blades and 4-sided lower blades can be flipped and resharpened as needed, saving money.
- Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life.
- Rigid, fully welded steel plate construction helps prevent flex and gives you many years of accuracy.
- Shadow line creates a reference line on the material so you know exactly where the cut will be.
- The SH-5210-HD plate shear is covered by a 1-year parts warranty.
Baileigh SH-5210-HD Specifications:
- Item Number: SH-5210-HD
- Blade Rake Angle: .5 to 2.0 degrees
- Back Gauge Length: 23.62"
- Shear Length: 52"
- Motor: 7.5 hp
- Thickness (SS): 10 ga. (13 ga.)
- Strokes Per Minute: 35 – 47
- Front Gauge Length: 39.37"
- Blade Angle: 1/2° – 2° Adjustable
- Blade Gap Adjustment: Manual, Lever Acuated
- Power: 220V / 3-phase
- Shipping Weight: 4200lbs
- Minimum Material Thickness: 24ga
- Shipping Dimensions (Inches): 88x45x66
Model# | 1007122 |
---|---|
Brand | Baileigh |
Log In