Baileigh DP-1850G 220V 3Phase Gear Driven Drill Press. Power Feed, Coolant System, MT4 Spindle

Baileigh DP-1850G Gear Driven Drill Press Features:

• 2 hp motor runs on 220-volt 3-phase power.
• 26-3/4” swing to tackle large pieces of material.
• Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”.
• Gear head turns at speeds between 90 and 2425 rpm, so you can select the right speed for almost any application.
• #4 Morse spindle taper feed is electric and completely adjustable.
• Massive column and cast steel base reduce flexing even when you’re drilling at full capacity.
• 21-1/4” x 17-1/4” work table with X-pattern T-Slots.
• .7” table-slots allow for a vise or fixture to get a firm hold on the material.
• Includes an electronic power-down feed and a coolant system to prolong the drill’s lifetime of use.
• Equipped with a chuck and an automatic tool ejector to adapt to your project quickly and easily.
• Comes standard with a protective shield and a halogen light for safer drilling in your shop and elsewhere.

Baileigh DP-1850G Specifications:

• Item Number: DP-1850G
• Spindle Speeds: 12
• Max. Drill Capacity: 1.57"
• Max. Tapping Capacity: 7/8"
• Swing: 26-3/4"
• Distance from Spindle to Table: 4" to 24-3/8"
• Distance from Spindle to Base: 47"
• Spindle Taper: MT-4
• Spindle Travel: 7-3/4"
• Spindle Speed Range: 90-2,425 RPM
• Power Feed: .0047", .0094", .0157"
• Table Size: 17-1/4"x 21-1/4"
• Base Size: 33" x 25"
• T-Slot Width: .7"
• Motor: 2 hp
• Power: 220V 3-phase
• Shipping Weight: 1225lbs
• Shipping Dimensions (Inches): 60x44x90