Baileigh DP-1500VS 220V 1Phase Inverter Driven Drill Press 3 Speed Power Down Feed 1-1/2 Inch Mild Steel Capacity

Baileigh DP-1500VS Driven Drill Press Features:

• 2 hp motor runs on 220-volt single-phase power and will work practically anywhere.
• Handles a maximum drilling capacity of 1.5” steel and 1.75” cast iron.
• Auto-reversing tapping feature has a capacity of .937”.
• Speed range from 65 to 2000 rpm lets you pick the right setting for your project.
• Potentiometer dial controls the drill speed.
• Digital readout on the front displays the speed in rpm for easy checking.
• Sophisticated Delta® inverter drives #4 Morse taper spindle.
• Chuck with automatic tool ejector simplifies tooling changes.
• Large, machined 22” x 18.5” drill table offers plenty of room for material.
• Oversized .625” T-slots allow for secure clamping of a vise or fixture.
• Sturdy 4.52” column eliminates flex and boosts drilling accuracy.
• Cast base supports rigidity at maximum capacity.
• Power-down feed helps to prolong the machine’s lifetime of use.
• Safety guard around the spindle with a limit switch protects you and your shop.
• Powerful coolant system, housed in the base, keeps the drill from overheating and helps the drill last longer.
• Includes a bright halogen light that bends to enable you to see the material better as you work.

Why choose the DP-1500VS over similar drill presses?

You can extend tooling usage by adjusting the inverter-driven head and quill speed to each different drill size.
Continuous speed range, instead of just a few pre-set speeds, allows you to fine-tune the setting as you work.
We use only the best-quality heavy metal castings for the base and table to add to the overall strength of the drill press.
The DP-1500VS comes standard with features that other brands consider upgrades, like coolant systems and worklights.

Baileigh DP-1500VS Specifications:

• Item Number: DP-1500VS
• Table Size: 22" x 18.5"
• Quill Diameter: 2.95"
• Quill Feed: .0078", .004", .002" per rev.
• Spindle Nose to Table: 22.75"
• Spindle Nose to Base: 40.75"
• Spindle Speed High: 245 – 2000 rpm
• Spindle Speed Low: 85 – 540 rpm
• Spindle Taper: MT 4
• Table Slot: .625"
• Tapping Capacity: .937"
• Main Motor: 2 hp
• Drill Capacity Cast Iron: 1.75"
• Drill Capacity Steel: 1.5"
• Power: 220V Single Phase
• Shipping Weight: 990lbs
• Spindle Travel: 5.9"
• Column Diameter: 4.52"
• Base Dimensions L x W: 27" x 19"
• Shipping Dimensions (Inches): 60x44x88