| This 1300-pound heavy duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives, and has a 5” dust port for easy attachment to any dust collection system. The cutterhead is a helical design with 150 four sided knife inserts – these produce a superior finish and much quieter operation compared to conventional cutterheads, and the inserts are installed without further adjustments. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. Infeed and outfeed rollers are fitted with roller bearings for long life. The sectional infeed roller and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed rollers facilitate both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work.
Powermatic 1791269 Features :
- Helical cutterhead with knife inserts provides smoother, quieter cutting and finer finish than conventional systems
- Cast iron 1300 lb. construction for solid performance without vibration
- 2 feed speeds - 20/30 fpm - accommodates rough and fine finish work
- Segmented infeed roller with sectional chipbreaker allows multiple board planing
- Roller bearing-mounted feed rollers for long life
- Adjustable bed rollers allow smooth feeding of rough or finished workpieces
- Oversized cast iron table travels on 2 large lead screws for heavy duty support
- Dust chute with 5" port for dust collection
- Standard Equipment: Dust collection port, Adjustable foot pads, Tool kit
- 1 Year Warranty
Powermatic 1791269 Specification :
- Bed Rollers Adjustable from Front: 2
- Blade Size: 0.59 L x 0.59 W x 0.10 Th
- Column Diameter: 2-1/2"
- Cuts Per Minute: n.a.
- Cutterhead Diameter: 3-1/4"
- Cutterhead Speed: 4,800 RPM
- Distance Between Rollers - Center to Center: n.a.
- Dust Collection Minimum CFM Required: 900
- Dust Port Diameter: 5"
- Feed Rate: 20 and 30 FPM
- Height: 59"
- Infeed Roller Diameter: 3"
- Length: 42"
- Maximum Depth of Cut: 3/16"
- Maximum Full Width Depth of Cut: n.a.
- Maximum Height of Rollers Parallel to Tabletop: table rollers - 0.05"
- Maximum Opening: n.a.
- Maximum Planing Thickness: 9-1/4"
- Maximum Planing Width: 22"
- Minimum Planing Length: 10"
- Motor HP: 7.5 HP
- Motor Phase: 3
- Motor Voltage: 460V
- Movement - Horizontal: n.a.
- Movement - Vertical: n.a.
- Net Weight: 1,350 lbs.
- Number of Knives: 150 four-sided inserts
- Number of Speeds: two
- Outfeed Roller Diameter: 3"
- Overall Dimensions: 42 x 49 x 59
- Planing Thickness Range: n.a.
- Prewired: n.a.
- Range of Speeds: n.a.
- Readout Scale: mm/in
- Rollers: n.a.
- Rotation (Forward/Reverse): n.a.
- Segmented Infeed Roller Diameter: 3"
- Shipping Weight: 1,430 lbs.
- Swing: n.a.
- Table Height Adjust Manual: 1 Turn = 1/16
- Table Size: 32-1/4" x 24"
- Table Support: 2-column
- Tool Supplied: Yes
- Width: 49"
* Residential delivery is $50 and Lift gate will be $75 (quoted separately). |
