| |
|
|
|
|
|
|
 |
|
 |
|
Porter Cable 345 - 6 inch (150MM) Saw Boss® Circular Saw |
| |
Porter Cable 345 - 6 inch (150MM) Saw Boss® Circular Saw. Framing cuts are a breeze with the 6-inch SawBoss. The blade is on the left for better visibility. Great for overhead uses like cutting off rafter tails. Lighter than 7-1/4" saws, it won't cause fatigue as quickly when used for vertical applications. The dust nozzle allows the operator to direct dust to the side, away from his/her face. The 6 inch blade is able to cut 45 degree angles in all 2X framing lumber and a unique miter lip protrudes below the guard to prevent guard hang-ups at all angles. The 9 amp motor is all ball and needle bearing construction for long life. The base has adjustable positive stops at 45 degrees and 90 degrees for accurate angel cutting. For easy blade changes, a spindle lock is standard. The adjustable base insert allows splinter-free cutting on either side of the blade. One year warranty with a 30 day performance certification. Includes saw, 18 tooth carbide-tipped Riptide blade #12850, blade wrench #48306, dust nozzle #39333, base insert #698460 and operating manual. |
|
|
 $149.99 |
|
|
|
|
 |
|
Porter Cable 314 4-1/2 inch Trim Saw |
| |
Porter Cable 314 4-1/2" Trim Saw. This worm gear driven trim saw provides smoothness and durability that can't be beat. The rugged worm gear transmits power smoothly to the blade because the gears have the same amount of surface area contact at all times. The 4.5 amp ball bearing motor turns at 4,500 rpm to quickly power through all plywoods, paneling, and "1-by" lumber. It will cut 1-5/16 inches deep at 90 degrees, and 1-1/16 inches at 45 degrees. The kit includes the saw, 20 tooth carbide-tipped Riptide blade no. 12870, blade wrench no. 48317, knob no. 857990, and operator's manual. |
|
|
$234.99 |
|
|
|
|
 |
|
Porter Cable 9741 Variable-Speed Quick-Change™ Tiger Saw |
| |
Porter Cable 9741 Variable-Speed Quick-Change™ Tiger Saw. There are lots of recip saws on the market for you to choose from, but we particularly like this one. Sure, its 9 amp motor runs the blade at up to 2,600 strokes per minute with electronic variable speed. But when it's time to replace the blade, only Porter-Cable offers the Quik-Change blade clamp that truly lets you change out a spent blade in literally seconds. You can even install the blade upside down if that helps you get the job done more easily. Need just a little more reach? Adjust the front shoe to put more of the blade's teeth to work for you. |
|
|
$109.99 |
|
|
|
|
 |
|
Porter Cable 9543 Quik-Change Bayonet Saw Kit |
| |
Porter Cable 9543 Quik-Change Bayonet Saw Kit. Porter-Cable Quik-Change Jig Saw. 6 Amps, variable speed 500-3100 SPM. Quik-Change blade system lets you change blades in seconds, no tools required. |
|
|
$177.99 |
|
|
|
|
 |
|
Porter Cable 9748 Variable-Speed, Dual Action Quik-Change™ TIGER SAW® Kit (Replacement of 9746) |
| |
Porter Cable 9748 Variable-Speed, Dual Action Quik-Change™ TIGER SAW® Kit. Extra-heavy-duty 11.5 AMP motor provides maximum power for all cutting applications.
This item is a replacement of Porter Cable 9746 Variable Speed Tiger Saw. |
|
|
$158.99 |
|
|
|
|
 |
|
Porter Cable 9735 - Quick Change Tiger Saw |
| |
Porter-Cable 9735 - Quick Change Tiger Saw. |
|
|
$136.99 |
|
|
|
|
 |
|
Porter Cable 3812S - Portable Table Saw with Stand |
| |
Porter-Cable 3812 includes a combination of full-size features not often found on bench-top saws. With a full 24-1/2-inch rip capacity, this saw has no trouble ripping a half sheet of plywood. A convenient lever under the front of the table operates slide-out material support rails. A contractor style miter gauge with standard 3/4-inch T-slots offers better support and improved accuracy. A full-size throat plate simplifies blade changes and has room for 13/16-inch stacked dado blades. An exclusive full-size trunion mounting system minimizes vibration and maintains the centerline of the blade throughout bevel travel and reduces time-consuming fence adjustments. Weighing only 60 pounds, this saw is light enough for one individual to manage, yet sturdy enough to perform demanding cuts. The unit stores easily in a mini-van or pick-up for convenient portability. |
|
|
$510.99 |
|
|
|
|
 |
|
Porter Cable 423MAG - 7 1/4 inch Quik-Change™ Blade-Left MAG-SAW™ Kit |
| |
Porter Cable 423MAG - 7 1/4 inch Quik-Change™ Blade-Left MAG-SAW™ Kit. Standard Equipment: Saw, 18T carbide tipped RAZOR™ blade, case #907834 and operating manual.
|
|
|
$134.99 |
|
|
|
|
|
 |
