| |
|
|
|
|
|
|
 |
|
 |
|
Porter Cable COIL350 Magnesium Coil Framing Nailer |
| |
Porter Cable COIL350 Magnesium Coil Framing Nailer. This Porter-Cable model accepts standard 15-degree wire-collated coil framing nails from 1-1/2 to 3-1/2 inches. The kit comes with a 1/4-inch NPT air inlet and 1/4-inch male quick coupler (with dust cover), oil for the nailer, wrenches, and an operating manual. |
|
|
 $349.99 |
|
|
|
|
 |
|
Porter Cable FR350MAG Magnesium Round head Framing Nailer Kit |
| |
Porter Cable FR350MAG Magnesium Round head Framing Nailer Kit. The gun accepts standard 22-degree, plastic, collated round-head stick nails from 2-3/8 to 3-1/2 inches long. The kit comes with a 1/4-inch male quick coupler (with dust cover), oil for the nailer, and wrenches. This magnesium round-head framing nailer from Porter-Cable is a rugged, lightweight piece of equipment.
|
|
|
$282.99 |
|
|
|
|
 |
|
Porter Cable COIL250 Framing Nailer |
| |
Porter Cable COIL250 Framing Nailer. This Porter-Cable model accepts standard 15-degree wire-collated coil framing nails from 1-1/2 to 2-1/2 inches long. The kit comes with a 3/8-inch NPT air inlet and 1/4-inch male quick coupler (with dust cover), oil for the nailer, wrenches, and an operating manual. |
|
|
$349.99 |
|
|
|
|
 |
|
Porter Cable FCN200 - 2 inch Flooring Cleat Nailer |
| |
Porter Cable FCN200 - 2" Flooring Cleat Nailer. The nailer is designed specifically for installing tongue-and-groove hardwood flooring with L-shaped flooring cleats and a thickness of 1/2 to 25/32 inch. The nailer works on 70-100 psi of compressed air and drives cleats with accuracy and force through even the toughest woods, but without damaging even the most delicate pre-finished floor. |
|
|
$562.99 |
|
|
|
|
 |
|
Porter Cable PIN100 - 23-Gauge Pin Nailer Kit |
| |
The Porter Cable PIN100 is perfect for hobbies, intricate work, or just using the pin as a "hold-down" while your glue dries. The hole produced by the 23 gauge pin is so small that a wipe with a damp rag makes the hole virtually invisible to the naked eye. Although this unit is small and lightweight, it is not lacking on performance or features. |
|
|
$104.99 |
|
|
|
|
 |
|
Porter Cable MS200 Medium Crown Stapler |
| |
Porter Cable MS200 Medium Crown Stapler. The open top-load magazine makes for easy reloads and will hold up to 150 staples for less down time. An adjustable depth-of-drive mechanism allows countersinking fasteners to match the application. The bump-fire trigger allows for faster operation. |
|
|
$251.99 |
|
|
|
|
 |
|
Porter Cable FC350A - 3 1/2 inch Clipped-Head Framing Nailer Kit |
| |
Porter Cable FC350A 3 1/2 inch Clipped-Head Framing Nailer Kit. Uses 30 to 34 degree 2" to 3 1/2" x .113" to .131" paper collated clipped-head framing nails. This is a super-reliable workhorse that even alerts you when it's time to reload—-and that takes only a couple of seconds. |
|
|
$203.99 |
|
|
|
|
 |
|
Porter Cable FR350A - 3 1/2 inch Round-Head Framing Nailer Kit |
| |
Porter Cable FR350A 3 1/2" Round-Head Framing Nailer Kit. Uses 22 degree 2" to 3 1/2" x .113" to .148" plastic collated round-head framing nails. This nailer is for the contractor or do-it-yourselfer in the Southeast, Gulf Coast and Western regions with its 22-degree plastic collated round head framing nails from 2 to 3-1/2 inches long. |
|
|
$204.99 |
|
|
|
|
 |
|
Porter Cable PN650 Palm Nailer Kit |
| |
Porter Cable PN650 Palm Nailer Kit. Porter-Cable's palm nailer is growing in popularity among both woodworkers and contractors alike--and for good reason. Capacity 1-1/4" to 6-1/2" nails (3d to 70d) Comes with four different nose tips. The kit comes with a "no-mar" finish tip, a magnetic tip for driving 3d to 16d common nails, a standard tip for common nails up to 70d, and a steel hammer kit for moldings, dowels, and automotive body work. |
|
|
$129.99 |
|
|
|
|
 |
|
Porter Cable CFFN251T 3 Nail Guns Combo Kit with Compressor |
| |
Porter Cable CFFN251T 3 Nail Guns Combo Kit with Compressor. The NS100A Stapler and sturdy canvas carry bag, 6 gallon compressor, 40' air hose with coupler and plug, 3,000 fasteners, oil and operating manuals. |
|
|
$319.99 |
|
|
|
|
 |
|
Porter Cable RN175A - 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer |
| |
Porter Cable RN175A - 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer. Porter-Cable delivers professional results on job sites around the United States with the introduction of its new roofing nailer. This tool has a collated clipped head and nail length specifications to meet the roofing and nailing demands of any project. The new rounded body style offers increased comfort and the overall design has doubled the life of tool. The RN175A has a new rubber grip for increased ergonomics and aesthetics. The new roofing nailer has a selectable trigger that works in either restrictive or contact mode, which does not require any tools or other mechanism to switch from restrictive to contact mode. The RN175A uses 15 degree 3/4 to 1-3/4 inch wire collated roofing nails.
|
|
|
$222.99 |
|
|
|
|
 |
|
Porter Cable BN138 - 5/8 Inch to 1-3/8 Inch 18 Gauge Brad Nailer Kit |
| |
Long life maintenance-free motor to keep from staining the work surface. Tool-free depth-of-drive adjustment with detentes for proper setting of nail heads. Contact safety located behind driver guide for better visibility. |
|
|
$69.00 |
|
|
|
|
|
 |
