| |
|
|
|
|
|
|
 |
|
 |
|
Milwaukee 4204-1 DRILL 1/2 MAG PRESS 7.2A |
| |
Milwaukee 4204-1 Adjustable Position Electromagnetic Drill Press with 1/2 in. Motor. This combination unit features the 4203 adjustable position, variable speed base and the 4253-1 1/2 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
|
|
|
$1,229.99 |
|
|
|
|
 |
|
Milwaukee 4206-1 Adjustable Position Electromagnetic Drill Press with 3/4 in. Motor |
| |
This combination unit features the 4203 adjustable position, variable speed base and the 4262-1 3/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
|
|
|
$1,409.99 |
|
|
|
|
 |
|
Milwaukee 4208-1 Adjustable Position Electromagnetic Drill Press with No. 3 MT Motor |
| |
This combination unit features the 4203 adjustable position, variable speed base and the 4297-1 1-1/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
|
|
|
$1,529.99 |
|
|
|
|
 |
|
Milwaukee 4209-1 Adjustable Position Electromagnetic Drill Press with No. 3 MT Motor |
| |
This combination unit features the 4203 adjustable position, variable speed base and the 4297-1 1-1/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
|
|
|
$1,529.99 |
|
|
|
|
 |
|
Milwaukee 4210-1 Fixed Position Electromagnetic Drill Press with 3/4 in. Motor |
| |
This combination unit features the 4202 fixed position variable speed base and the 4262-1 3/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
|
|
|
$1,324.99 |
|
|
|
|
 |
|
Milwaukee 4253-1 1/2 in. Motor for Electromagnetic Drill Press, 600 RPMS |
| |
The 4253-1 electromagnetic drill motor features 6.2 amps and a 1/2 in. chuck turning at 600 rpm. This motor is best used on the 4202 fixed position base. Light weight and ample power make this a good choice for smaller holes into steel.
|
|
|
$314.99 |
|
|
|
|
 |
|
Milwaukee 4262-1 3/4 in. Motor for Electromagnetic Drill Press, 350 RPM |
| |
This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4262-1 features an 11.5 amp motor with a 3/4 in. chuck. This unit has 350 rpm, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is to large
|
|
|
$523.99 |
|
|
|
|
 |
|
Milwaukee 4270-20 Compact Electromagnetic Drill Press - 450 RPM |
| |
The tool is setup to accept standard 3/4 in. Weldon shank cutters, or an optional 3-jaw chuck is available for use with twist drill bits. Capacity to cut up to 1-1/2" diameter holes thru 2" steel with annular cutters, or 1/2" diameter holes, 4-1/4" deep with twist drill bits. The simple two-button control panel is located on the back, away from feed handle obstruction.
|
|
|
$868.99 |
|
|
|
|
|
 |
