FEATURES
1/2 inch capacity, 6.2 amp motor, 600 RPM
1/2 inch keyed chuck
Taps up to 5/8 inch -18 threaded hole. 5/8-11 and 1/2-13 taps not recommended
Develops up to 1650 pounds of drill point pressure with a 1 inch steel plateSPECIFICATIONS
Voltage : 120 AC Only
Drill Capacity : 1/2 in
Amps : 6.2
No Load Speed : 600 RPM
Tap Capacity: 5/8 in.-18
Drill Point Pressure : 1,610/1,650 lbs.
Chuck or Taper: Chuck DESCRIPTION
The 4253-1 electromagnetic drill motor features 6.2 amps and a 1/2 in. chuck turning at 600 rpm. This motor is best used on the 4202 fixed position base. Light weight and ample power make this a good choice for smaller holes into steel. |
