Makita LXT2 Features :
- BHP451 Hammer Drill-Driver
- LXT Lithium-Ion battery and optimum charging system produces 280% more lifetime work with 2x more cycles
- Compact design at only 9-7/8" length and weighs only 4.9 lbs. for less operator fatigue
- Makita built, 4-pole maximum torque motor delivers 560 in. lbs. of efficient torque in a compact size
- Ergonomic shape fits like a glove with even pressure and easy control
- LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
- 45-minute Optimum Charger and battery communicates throughout the charging process using the built-in chip in the battery and built-in CPU chip in the charger - The Charger also uses "Active 3 Control" for current control, thermal control & voltage control
- Two built-in L.E.D. lights for more illuminated work
- 3-Speed design produces 25% faster working speed with more efficiency in a wider range of applications
- 45-minute Optimum Charger has a built-in fan to cool the battery to produce more lifetime work
- Shift-Lock™ drive system quickly shifts from "hammer drill" to "driver" mode with one touch
- Two-piece armature and field along with externally accessible brushes for serviceability and longer motor life
- BGA452 Cutoff/Angle Grinder
- LXT Lithium-Ion battery and optimum charging system produces 280% total lifetime work with 2x more cycles
- Slide switch with lock-on
- Makita built produces 50% faster grinding with an impressive 10,000 RPM
- More compact design at only 12-1/2" long and weighs only 4.2 lbs. for less operator fatigue
- LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
- 45-minute Optimum Charger and battery communicates throughout the charging process using the built-in chip in the battery and built-in CPU chip in the charger - The Charger also uses "Active 3 Control" for current control, thermal control & voltage control
- 45-minute Optimum Charger has a built-in fan to cool the battery to produce more lifetime work
- Built-in electronic control circuit with L.E.D. warning lights for overload protection
- Ergonomic shape fits like a glove with even pressure and easy control
Makita LXT2 Specifications :
- BHP451 Hammer Drill-Driver
- Capacity Steel: 1/2 Inch
- Capacity Wood: 2-9/16 Inches
- Capacity Masonry: 5/8 Inch
- No Load Speeds Low: 0-4,500 RPM
- No Load Speeds Mid: 0-9,000 RPM
- No Load Speeds High: 0-25,500 RPM
- Blows per Minute Low: 0-4,500 BPM
- Blows per Minute Mid: 0-9,000 BPM
- Blows per Minute High: 0-25,500 BPM
- Chuck Size(metal): 1/2 Inch
- Maximum torque: 560 Inch-Pounds
- Overall Length: 9-7/8 Inches
- Net Weight: 4.9 Pounds w/battery
- BGA452 Cutoff/Angle Grinder
- Grinding Wheel Diameter: 4-1/2 Inches
- Cut-Off Wheel Diameter: 4-1/2 Inches
- Wire Cup Brush Diameter: 3-1/2 Inches
- Sanding Disc Diameter: 4-1/2 Inches
- No Load Speed: 10,000 RPM
- Spindle Thread: 5/8 Inch - 11 UNC
- Overall Length: 12-1/2 Inches
- Net Weight: 5.6 Pounds w/battery
- Battery and Charger
- Battery Rating: 18 Volt
- Battery Technology: Lithium-Ion
- Battery Amp Hours: 3.0 Ah
- Watt Hours: 54.0 Hours
- Charge Time: 45 Minutes
- General
- Number of Tools in Kit: 2
- Number of Batteries: 2
Makita LXT2 Includes :
- One (1) Hammer Drill-Driver (BHP451)
- One (1) Cutoff/Angle Grinder (BGA452Z)
- One (1) Cut-Off wheel guard (135103-2)
- One (1) Grinding wheel guard (125267-0)
- One (1) Grinding Wheel (7414248-1)
- One (1) Cut-Off Wheel (724112-A-25)
- One (1) 45-minute optimum charger (DC18SC)
- Two (2) LXT Lithium-Ion 3.0Ah batteries (194205-3)
- One (1) Screwdriver bits (784637-8)
- One (1) Tool case (824754-3)
