• Built-in laser with micro fine adjustments clearly indicates line of cut, independent switch allows laser to be seen independently of blade rotation
• Large turn base and adjustable pivot fence supports larger stock
• Built-in high output fluorescent light illuminates work area and lasts 2,000 hours on average
• Dual steel rails supported by linear ball bearings ensure stable, accurate cutting
• Powerful, direct drive 15 AMP motor never slips or bogs down
• 9 positive stops at 15° , 22.5°, 30°, 45° left or right and 0° for the most common miter cuts, additional positive stops at 33.9° left for Model LS1214FL
• Single cast aluminum base has built-in wrench storage for operator convenience
• Long slide track and wide pivot angle allow cross cuts up to 4 x 12 material
• Electronic speed control maintains constant speed under load, soft start feature for controlled operation

Makita LS1214FL Specifications :

• Cutting Capacity 0° Bevel Angle
  • Miter Angle 45° (left): 1-3/4 X 8-1/2 Inches
  • Miter Angle 0° : 4-1/2 X 12-1/8 Inches
  • Miter Angle 45° (right): 4-1/2 X 8-5/8 Inches
  • Miter Angle 52° (right): 4-1/2 X 7-1/4 Inches
• Cutting Capacity 45° (left)Bevel Angle
  • Miter Angle 45° (left): 2-5/8 X 12 Inches
  • Miter Angle 0° : 2-5/8 X 12 Inches
  • Miter Angle 45° (right): 1-3/4 X 12 Inches
• Cutting Capacity 45° (right)Compound Angle
  • Miter Angle 45° (left): 2-5/8 X 8-1/2 Inches
  • Miter Angle 0° : 1-3/4 X 12 Inches
  • Miter Angle 45° (right): 1-3/4 X 8-1/2 Inches
• General Specs
  • Blade Diameter: 12 Inches
  • Arbor: 1 Inch
  • No Load RPM: 3,200
  • AMPS: 15.0
  • Length: 28-1/2 Inches
  • Width: 20-1/2 Inches

Makita LS1214FL Includes :

• One (1) Miter Saw
• One (1) 12" x 70T Carbide-Tipped Blade (A-94443)
• One (1) Vertical Vise (122540-9)
• One (1) Dust Bag (122523-9)
• Two (2) Extension Wing (322932-4)
• One (1) Sub-Fence (right) (153898-5)
• One (1) Triangular Rule (762001-3)
• One (1) Socket Wrench #13 (782212-4)