Makita HR4001C Features :
- Easy to use one touch sliding chuck accepts SDS-Max hammer steel bits
- The 2-mode switch allows you to go between "hammering only" or "hammering with rotation"
- Incorporates the Anti Vibration Technology or AVT to eliminate most of the fatigue causing vibrations that accompany using rotary hammers
- The preset variable speed dial with 5 settings allows you to match the bit speed to the job application
- With the 16.4 foot jobsite cord you get greater versatility and instant power with a longer cord
- The L.E.D. power light indicates switch failure or cord breakage
- The L.E.D. service light indicates carbon brushes need to be replaced
- The externally accessible brushes allow for easy replacement of brushes leading to a longer motor life
Makita HR4001C Specifications :
- Capacity Concrete (with core bits): 4-1/8 Inches
- No Load Speed: 235 - 480 RPM
- Blows per Minute: 1,350 - 2,750 BPM
- Impact Energy: 9.5 Joules
- AMPS: 11
- Bit Type: SDS - Max. shank bit
Makita HR4001C Includes :
- One (1) 1-9/16" SDS-MAX Rotary Hammer
- One (1) Side Handle (416299-1)
- One (1) D-Handle (417003-1)
- One (1) Depth Gauge (321248-4)
- One (1) Tube of Bit Grease (181573-3)
- One (1) Tool Case (154678-2)
