Features:
10-20 PLUS DRUM SANDER
- Infinitely variable feed rate from 0 to 12 feet per minute for surface, dimension, and finish sanding
- Patented abrasive take-up fasteners for quick abrasive changes
- Self-cooling precision-machined and ballanced 5 x 10 extruded aluminum drum
- TEFC motor prevents dust infiltration
- Continuous-duty, motor allows heavier use for longer periods
- Precision-flattened reinforced steel conveyor bed
- No-give power feed conveyor belt
- Zinc-plated steel tension rollers mount next to the drum
- Drum height and downward pressure are adjustable, eliminating snipe
- 1/16 per turn height adjustment
- Easy-to-use cast iron height adjustment handwheel allows both radical height changes and minute adjustments for extremely precise sanding thickness control
- Minimal assembly required
- Minimum of 400 CFM dust collection recommended
- Safety power switch with overload protection on front of base
- Drum operates at 1,700 RPM
- Drum ball bearing is sealed and permanently lubricated
Standard Equipment:
- One 80 grit abrasive strip
- One 100 grit abrasive conveyor belt
- TRACKERS
- Variable speed conveyor
- TUFTool
- 4 dust port
Specifications:
- Model 10-20 Plus
- Sanding Capacities
- Max. Width (In.) 20 (Two Passes)
- Min. Length (In.) 2-1/4
- Max. Thickness (In.) 3
- Min. Thickness (In.) 1/32
- Drum Dimensions(dia.xl/in.) 5x10
- Drum Speed (RPM) 1,700
- Dust Port Diameter (In.) 4
- Conveyor Motor 43 in. -Ibs, Torque, Direct Drive, DC
- Conveyor Variable Feed Rate (FPM] Oto12
- Motor (TEFC) IHPJPh, 115V
- Net Weight (Lbs.) 74
* Residential delivery is $50 and Lift gate will be $75 (quoted separately). |
