The Hitachi D10YB 3/8-Inch Right Angle Drill is built with a powerful 4.6 Amp motor and comes with a dial-in variable speed control, allowing you to maintain your selected speed from 500 to 2,300 RPM under load. The right angle design and low profile, 3-1/4-inch head of this drill allow you to easily reach tight corners and odd angles, making this versatile tool especially suited for plumbing and electrical applications.

The Hitachi DH50SBK Spline Shank 2" Rotary Hammer is used for crushing, demolition, groove-digging, edging, trimming, removal of concrete, drilling concrete and drilling anchor bolt holes.

Hitachi DH22PG 7/8-inch SDS Rotary Hammer. Hitachi’s most compact and lightweight SDS hammer ever, the new DH22PG is ideal for overhead or extended use applications and allows the user to gain access to the tightest areas.

Hitachi DH24PB3 15/16 inch Rotary Hammer. Provides 720 Watts Of Input Power & Top Of Class Drilling Speed, Top Of Class Impact Energy Of 2.1 FT IN LBS, Quick Set Bit System Makes Replacing Bits Quick & Easy.

Hitachi DH24PF3 15/16-Inch 7 Amp SDS Rotary Hammer with D-Handle offers some of the fastest drilling available in a rotary tool. This Hitatchi rotary hammer has an astounding 2.5 feet-per-pounds of impact energy. The 7 Amp motor that powers this tool is capable of drilling 1/2-inch in steel, 15/16-inch in concrete and 2-inch core bits.

Hitachi's DH38YE is a spline drive 1 1/2" rotary hammer with 5.2 foot pounds of impact energy. It offers two modes of operation, drilling and hammer drilling, along with protective sealed gease bearing and a dust proof cover. External brush access makes for easy exchange. This tool comes with a side handle, depth gauge and carrying case.

Hitachi DH30PC2 1 3/16 inch SDS Plus Rotary Hammer. This tool has been shortened by 1.5" to make it easier to use in tight places and the weight is only 9.5 lbs. The powerful 7.4 Amp motor delivers 850 Watts of input power.

Hitachi DH45MR SDS Max 1 3/4 inch Rotary Hammer. Hitachi’s patented IDI technology gives users the most durable housing on the market, while adding life to the motor. IDI allows the motor bearing to be seated in aluminum, not plastic, preventing deviation of the motor core and grease leakage caused by heat and stress.

The Hitachi DH40FR 1-9/16-Inch Spline Rotary Hammer delivers high-speed drilling and forcible chipping with low vibration and noise level. With 10 joules of impact energy and a 9.2 Amp motor, this rotary hammer will increase your productivity.

The DH25PB Rotary Hammer offers the end-user 2 modes of operation. Its ''rotation and striking'' mode can be used to drill anchor holes in concrete, tile and brick. The ''rotation only'' mode can be used in conjunction with the chuck adapter to drill holes in steel and wood or tighten machine / wood screws.

Get power and convenience with Hitachi's 2" SDS Max Rotary Hammer. The user vibration protection combines counter balance with handle dampers to reduce full-load vibration by up to 55%, and its ergonomic soft grip handle provides comfort and control. The constant speed control maintains speed as the load varies while the idle strike restrictor prevents no-load hammering, extending tool life.