| |
|
|
|
|
|
|
 |
|
 |
|
Freud 99-260 1-11/16-Inch Matched Rail and Stile Bit Set |
| |
Matched Rail & Stile Bit Set, 1/2" shank.Freud's precision ground carbide bits have a grain size smaller than other grades, and titanium is added making them impervious to chemical attack. |
|
|
 $99.99 |
|
|
|
|
 |
|
Freud 99-261 1-11/16-Inch Matched Rail and Stile Bit Set with 23/32- Inch Carbide Height |
| |
Matched Rail & Stile Bit set, 1/2" shank.Freud's precision ground carbide bits have a grain size smaller than other grades, and titanium is added making them more impervious to chemical attack. |
|
|
$99.99 |
|
|
|
|
 |
|
Freud 99-263 1-11/16-Inch Matched Rail and Stile Bit Set with 3/4- Inch Carbide Height |
| |
Matched Rail & Stile Bit Set, 1/2" shankBits are computer balanced to insure vibration-free operation at speeds that are a safe margin above the typical 18,000 RPMs of most routers. |
|
|
$99.99 |
|
|
|
|
 |
|
Freud 99-510 2 + 2 Raised Panel Router Bit - 1/2 inch Shank |
| |
NEW Four Wing Cutter, Raised Panel Bit, 1/2" shank. Make panels for doors and paneling from 3/4" stock. This leaves none of the fuzz associated with standard three-wing cutters. Overall diameter 2-3/4-inch, bearing diameter 1/2-inch, carbide height 5/8-inch, large radius 35/64-inch, overall length 2-1/2-inch. |
|
|
$89.99 |
|
|
|
|
 |
|
Freud 99-520 3-1/2-Inch Raised Panel Bit |
| |
Freud's exclusive 2+2 raised panel bits produce raised panels that are glass smooth, even on cross grain and never have the bothersome fine splinters at the top of the profile edge. Freud's engineers have set two wings to do the main cutting of the profile, while two others cut the top part of the profile. This leaves none of the fuzz associated with standard three-wing cutters. |
|
|
$94.99 |
|
|
|
|
 |
|
Freud 99-515 3-1/2-Inch 2+2 Raised Panel Bit |
| |
NEW Four Wing Cutter, Raised Panel Bits, 1/2" shank, for use on 3/4" stock.Overall diameter 3-1/2-inch, bearing diameter 1/2-inch, carbide height 5/8-inch, overall length 2-1/2-inch.
|
|
|
$79.99 |
|
|
|
|
 |
|
Freud 99-566 3-1/2-Inch Raised Panel Bit with Backcutters |
| |
Raised panel router bit with back cutter.
Shank dia 1/2", overall diameter 3 1/2", Small Diameter 1 1/4", Carbie Height 1", Minor Heigth 5/32", Overall Lenght 3". |
|
|
$99.99 |
|
|
|
|
 |
|
Freud 99-569 3-1/2-Inch Raised Panel Bit with Backcutters |
| |
Raised panel router bit with back cutter.
Shank dia 1/2", overall diameter 3 1/2", Carbide Height 1", Minor Height 5/64", Large Radius 1 1/2", Overall Lenght 3". |
|
|
$99.99 |
|
|
|
|
|
 |
