| |
|
|
|
|
|
|
 |
|
 |
|
Makita HR5000 2 Inch Rotary Hammer, Spline Shank, AC/DC |
| |
Makita HR5000 2 Inch Rotary Hammer, Spline Shank, AC/DC. Powerful 11 AMP motor for heavy duty use. Torque limiting clutch. "Spline" type drive system for maximum power.
Easy lever change from "hammering only" or "rotation with hammering". Automatic brush cut-out system to protect motor.
Large comfortable grip swivels 360° for easy handling. Factory grease packed for reduced maintenance |
|
|
 $769.99 |
|
|
|
|
 |
|
Makita HR4000C 1-9/16 Inch Rotary Hammer, SDS-Max |
| |
Makita HR4000C 1-9/16 Inch Rotary Hammer, SDS-Max. Electronic variable speed control dial (230 - 450 RPM) for easier hole starts. LED light indicates when to replace carbon brushes, and if there’s a problem with the switch or power source. Ball clutch torque limiter ensures stable torque control. One-touch sliding chuck for easy bit installation and removal. Includes both straight and D-handle options. Side grip swivels 360° and adjusts to 8 positions forward and back |
|
|
$472.99 |
|
|
|
|
 |
|
Makita HR4500C 1-3/4 Inch Rotary Hammer, SDS-Max |
| |
Makita HR4500C 1-3/4 Inch Rotary Hammer, SDS-Max. Electronic variable speed control dial (120 - 240 RPM). LED light indicates when to replace carbon brushes. Ball clutch torque limiter ensures stable torque control and stops the tool if the bit hits rebar. One touch sliding chuck for easy bit installation and removal. No hammering when idling protects the hammering mechanism for a longer tool life. Externally accessible brushes for fast jobsite replacement. 12 bit angle settings adjust the hammer steel to the desired position. Accepts SDS-Max shank rotary bits and hammer steel.
|
|
|
$556.99 |
|
|
|
|
 |
|
Makita HR4510C 1-3/4 Inch Rotary Hammer with Anti-Vibration Technology |
| |
Makita HR4510C 1-3/4 Inch Rotary Hammer with Anti-Vibration Technology. The 1-3/4" Anti-Vibration Rotary Hammer (HR4510C) from Makita merges extreme power with precision control and user comfort. The 13.5 AMP motor puts out a massive 1,250-2,750 BPM. The RPM are synchronized with the BPM in order to prevent overlapping impacts - yielding up to 50% more efficient drilling. The user can operate the variable speed control and the 2-mode operation to select between "Hammering with Rotation" and "Hammering Only" in order to get the best performance for the job. The Anti-Vibration Technology (AVT) dynamic vibration absorber ensures extra-low vibration performance and lower strain on the user.
|
|
|
$723.99 |
|
|
|
|
 |
|
Makita HR4010C 1-9/16 Inch SDS-MAX Rotary Hammer with AVT Technology |
| |
Makita HR4010C 1-9/16 Inch SDS-MAX Rotary Hammer with AVT Technology. Counterbalance system reduces vibration to only 4.5 m/s2 for unmatched comfort. L.E.D. power light indicates switch failure or cord breakage, L.E.D. service light indicates carbon brushes need to be replaced. One touch sliding chuck accepts SDS-Max hammer steel. 16.4 ft. jobsite cord for greater versatility and instant power. Counterbalance system reduces vibration to only 4.5 m/s2 for unmatched comfort. Externally accessible brushes for easy replacement and longer motor life. |
|
|
$549.99 |
|
|
|
|
 |
|
Makita HR4001C 1-9/16 Inch SDS-MAX Rotary Hammer |
| |
Powerful 11 AMP motor; efficient 1,350 - 2,750 BPM to tackle the most demanding jobs. Incorporates the Anti Vibration Technology or AVT to eliminate most of the fatigue causing vibrations that accompany using rotary hammers. The preset variable speed dial with 5 settings allows you to match the bit speed to the job application. The L.E.D. power light indicates switch failure or cord breakage. The externally accessible brushes allow for easy replacement of brushes leading to a longer motor life. With the 16.4 foot jobsite cord you get greater versatility and instant power with a longer cord. |
|
|
$438.99 |
|
|
|
|
 |
|
Makita HR2432 1 Inch Rotary Hammer (with Dust Collector) |
| |
Makita HR2432 1 Inch Rotary Hammer (with Dust Collector). Powerful 6.7 AMP motor and lightweight (6.6 lbs.); impact energy (1.6 ft.lbs.). Ergonomic well balanced design features a rubberized pistol grip for greater stability, comfort, and control with reduced operator fatigue. Durable hose is designed with elbow-shaped nozzle for longer life. Large trigger switch and 360º swivel side handle for added comfort. One touch sliding chuck for easy bit changes, accepts SDS-Plus bits. Positive bit lock ensures that the bit is securely fastened. |
|
|
$254.99 |
|
|
|
|
 |
|
Makita HM0860C 11 lb. Demolition Hammer |
| |
Makita HM0860C 11 lb. Demolition Hammer. Electronic variable speed adjusting dial for controlled operation. Bit can be set at 12 different positions for operating convenience. Low vibration and noise levels for increased user comfort. Accepts commonly used SDS-Max bits. Service reminder light indicates when to replace carbon brushes. Powerful 10 Amp motor & compact design. |
|
|
$419.99 |
|
|
|
|
|
 |
