Keep a clean shop. Connect any standard 1-1/4” vacuum hose to your Kreg Jig for faster drill strokes and a cleaner shop. Works only with Kreg Jig and Kreg Jig Master System.

The Kreg KJD/MICROBIT micro pocket step drill bit when used with the Kreg micro pocket drill guide is great for joining thinner pieces of material while still enjoying the speed.

3/8" high speed steel step drill bit for K200 Semi-automatic pocket hole press. The tip of this bit is 1/2" in length. Our bits have Kreg stamped into the shank of the bit for identification. Bits should be sharpened after approximately 2,500 holes.

An adjustment guide attached to the drill bit and helps set the proper hole depth in standard 1/2", 3/4", and 11/2" thick material.

The Kreg KJSC/MICROBIT is an adjustment collar and allen wrench to help set depth of KJD/MICROBIT Micro Pocket Drill Bit. It is made out of the same durable material as the standard size depth collar. It comes with an allen wrench, which is required for use.

The Kreg KJSS Material Support Stop lets you consistently repeat pocket hole spacings. Compatible with the K3 and K2000 model Kreg Jigs.

With a 25% smaller hole diameter, the Micro Pocket Drill Guide lets you create more compact, low-profile Pocket-Holes in the same joinery applications, but also tackle smaller projects, thinner stock, and tighter repair applications, where standard Pocket-Holes simply can’t go. Designed for use with the Kreg Jig or Kreg Jig Master System. Kit includes the Micro Pocket Drill Guide, Micro Pocket Drill Bit, Micro Pocket Depth Collar and Starter Screw Set.