Panasonic EY4542LN2M Features
- The multi purpose metal cutter rotates at a speed of 3,600 rpm and uses
a 5-3/8th C-6 tungsten steel carbide-tipped blade with 30 teeth and a 1/16"thin
kerf. The blade uses a chipping action rather than an abrasive action which
results in a much quicker cut. With the exceptionally thin blade kerf it cuts
clean with no need for de-burring after cutting. The EY4542LN2M has an adjustable
base plate that delivers cutting depth from 1/8" to 1-13/16", minimizing
the blade wear and maximizing the cutting efficiency. The blade cutting edge
is easily visible through the clear window on the blade guard. The EY4542LN2M
features a three way dust control system which reduces metal chip splash and
sawdust in an environmentally friendly manner. The EY4542LN2M is ideal for
cutting pipe, strut, threaded rod, metal stud. Just change to a wood or plastic
cutting blade to utilize the EY4542's multi purpose capability to also cut
various woods and plastics.
- The EY4542LN2M offers a full complement of convenience features including
an LED Work Light that illuminates the work area when in use, electric brake
to stop blade rotation once the trigger is released, a fully enclosed blade
to minimize chip splash, and a spindle lock button for easy blade replacement.
The EY4542LN2M is compact in size (13" long) and weighs only 5.7 lbs.
The ergonomic design delivers a comfortable contoured rubber grip which allows
for less fatigue over extended use. The EY4542LN2M is powered by a 3.0ah Cobalt
Li-ion battery pack. This battery pack delivers high output with low heat
generation resulting in twice the lifetime total performance versus current
Ni-Cd battery packs. In addition the EY4542LN2M utilizes Panasonic's unique
GuardION system. The GuardION system monitors each battery cell during battery
charging and during tool use to prevent over discharging and overheating of
the battery pack thus insuring long life.
- The EY4542LN2M uses a self diagnostic universal battery charger which electronically
monitors the condition of each battery cell in the battery pack during the
charging process to deliver full charging with minimal heat generation. The
charger will charge all Panasonic battery chemistries - Ni-Cd, Ni-MH, Li-ion
and all voltages from 7.2-28.8v. The 3.0ah Li-ion battery pack included in
the kit fully charges in 50 minutes. The kit comes with a tool, 2 - 3.0ah
Li-ion battery packs, a universal charger, and a molded case. This tool is
also available in a combo kit format or as a bare tool.
Panasonic EY4542LN2M Specifications
- Compact Size: Length 12 61/64"
- Lightweight: 5.7lbs
- Extra battery: Included
- Charging System: 50 minutes (using EY0L80B charger)- Not Included
- Max Cutting Depth: 1 13/16" 46MM
- RPM: 3,600
- Blade Size: 5-3/8"
- Electric Brake: Yes
- Ergonomics: Ergonomic design to reduce fatigue
- Safety Switch Lock Lever: Yes
- Shaft Lock Button: Yes
- 3 Way Dusto Collection System: Yes
- Wrap-around Blade Guard: Yes
- Transparent Window: Yes
- Acceptable Battery Packs: Panasonic 14.4V Li-ion Battery Pack (EY9L40B)
- LED Work Light: Yes
- GuardION Battery Protection System: Yes
- Typical Applications: Metal Construction, Electrical Instillation Work,
Plumbing, General Construction
- Carrying Case: Yes
- Available Formats: EY4542LN2M, EYC146B, EY4542X
- Dimensions (H x W x D): 8.984375'' x 12.953125'' x 6.296875''
- Weight: 5.7 lbs
