This blades produces a smooth, burr-free finish when cutting thin aluminum , brass and other non ferrous metal extrusions. A high tooth count with a 5 deg. hook angle allows the teeth to slice efficiently through the material without binding. The requirments on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. Freud recommends use of a liquid lubricant when cutting nonferrous materials. This can be accomplished with a spray of WD-40 or similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.
Dia 10", Teeth 100 Triple Chip Grind, Arbor 5/8", Kerf 0.110 and Plate thickness 0.087"
Features:
- Laser cut blade bodies and expansion slots
- Kickback reducing design
- Tri-metal brazing
- Covered by Freud's limited lifetime warranty
|
