Bosch CLPK50-120 12V Max 5-tool Litheon Combo Kit

This 12V Litheon 5 tool Cordless combo kit includes all of the tools necessary to handle almost any contractor job and comes packaged with two compact Lithium-Ion Batteries. The ultra-compact head is just 3.5" total head length allowing the I-Driver to fit where traditional drills, even right angle drills, can't go. The newly developed compact duty tool that can accommodate 90% of common applications comes with a 3/8" Single Sleeve tool less Chuck. When used with provided adapter the Multi-X can be used with competitors accessories including Dremel, Fein, and Proxxon. Designed to work with a variety of materials including soft woods, hard woods, drywall, plastic, metals and grouting.

Bosch CLPK50-120 12-Volt  I-Driver Features:

• I-Driver™ PS10
  
  • 90-Degree articulating head with five position locks helps the user get to hard to reach spots with ease
  • 80 in. lbs. of torque gives you the power you need for driving screws
  • The LitheonTM advanced lithium ion battery drives 100 3-inch screws per charge
  • Revolutionary variable speed trigger design provides increased sensitivity and control
  • Reversible drive allows the Pocket Driver to be equally useful at driving or removing screws
  • 7 setting electronic clutch enables precision driving and eliminates over torque in soft base materials
  • The drill mode allows pilot and other small bore holes
  • Built-in quick change chuck allows quick change between bits while preventing bit loss, simply pull to insert or release 1/4" hex shank bits
  • Built-in storage hanger gets the tool out of the way when you don't need and makes it easy to find when you do
• Impact Driver PS40
  • Up to 800 inch pounds of torque
  • Drives 100 3-inch screws per battery charge
  • Ultra-Compact design, that is almost half the size of a 12V compact driver
  • LED light for tight spaces and applications
  • Forward/Reverse button is equally useful at driving or removing screws
  • Quick change chuck prevents bit loss in drill or drive mode and enables precision driving
  • Prevents over torque in soft base materials
  • Max mode allows pilot and other small bore holes
  • Variable speed trigger for increased sensitivity and control
• Pocket Driver PS30
  
  • Capable of producing 220 in-lbs of Max Torque
  • Has 2 Speeds, low which runs at 0-400 rpm's and high that runs at 1-1,000 rpm's
  • Compact design is small enough to reach into tight areas and corners
  • The light weight design is great for over the head or continuous working conditions
  • The built in LED light helps illuminate working ares
  • Works with Bosch 10.8/12 Volt Lithium Ion line of tools
• Multi-X ™ PS50
  • The Multi-X performs like a corded oscillating tool with the functionality of a cordless tool
  • The compact design allows it to fit into tight spaces and is designed to sand and cut in corners
  • Tool can utilize over 10 different accessories that are able to handle jobs ranging from sanding to grout removal
  • A screw is used to tighten blades and accessories onto the Multi-X to ensure a strong, secure connection
  • Powerful enough to handle even the toughest jobs the Multi-X has a speed range of 5,000 to 20,000 RPM's
  • Variable speed dial allows you to easily adjust tool speed to fit project
  • Plastic nose of tool designed not to leave marks on work pieces
  • Designed with a soft comfortable grip toward the front of the tool, which allows you complete control of the tool
  • Tool has a fuel gauge to show when battery is in need of a charge
  • Lithium battery technology holds its charge for up to 6 months so the tool is ready when you are
• Compact Flashlight FL10
  • The 5 position pivoting head allows you to position the light beam to illuminate your work area
  • The beam has a fully adjustable focus
  • Has 6+ hours of continuous run time on a single battery charge

Bosch CLPK50-120 Specifications:

• Impact Driver PS40
  • No Load Speed: 0-1,800 RPM
  • Beats Per Minute: 0-3,000 BPM
  • Torque in Impact Mode: 800 Inch-Pounds
  • Torque in Drill Mode: 500 Inch-Pounds
  • Length: 6-1/2 Inches
  • Weight: 1.8 Pounds
• PS10 I-Drive
  • Bit Holder: 1/4 Inch Hex
  • No Load Speed: 0-600 RPM
  • Clutch Settings: 7+1
  • Trigger: Variable Speed Reversible
  • Torque: 80 Inch-Pounds
  • Length at 90°: 3-1/2 Inches
  • Length at 180°: 11-1/2 Inches
  • Voltage: 12
  • Battery Technology: Lithium Ion (Li-Ion)
  • Battery Type: Pod
  • Charge Time: 30 Minutes
• PS30 Pocket Driver
  • Chuck Size: Single Sleeve 3/8" Chuck
  • Key-Less: Yes
  • No Load Speed Low: 0-400
  • NO Load Speed High: 0-1,100
  • Max Torque: 220 Inch-Pounds
  • Voltage: 12 Volts
  • Battery Technology: Lithium Ion (Li-Ion)
• PS50 Multi-X Oscillating Tool
  • Amps: 1.3 A
  • Volts: 10.8/12 Volt Max
  • No Load Speed: 5,000-20,000
  • Angle Adjustment Capability: Up to 120°
  • Fuel Gauge: Yes
  • Battery Technology: Lithium Ion (Li-Ion)
  • Charge Time: 30 Minutes
  • Tool Length: 10.9 Inches
  • Tool Height: 2.32 Inches
• Flashlight FL10
  • Bulb Type: Xenon
  • Pivoting Head Positions: 5
  • Weight: 1.6 Pounds
  • Battery & Charger
  • Rating: 12 Volts
  • Battery Technology: Lithium-Ion (Li-Ion)
  • Charge Time: 30 Minutes
  • Number of Batteries: 2
  • Number of Tools In Kit: 5

Bosch CLPK50-120 12-V Impact Driver Includes:

• One (1) PS10B 12V Max I-Driver
• One (1) PS30B 12V Max Litheon 3/8” Drill/Driver
• One (1) PS40B 12V Max Litheon Impactor Fastening Driver
• One (1) PS50B 12V Max Multi-X Oscillating Tool
• One (1) FL10 12V Max Litheon™ Flashlight
• One (1) Jobsite Bag
• One (1) 30 Minute Charger (BC430)
• Two (2) 12V Max Litheon Batteries (BAT411)
• One (1) 1.5 in (38mm) Power Drill Bit
• One (1) HCS Plunge Cut Blade (1-5/8x1-1/2) - OSC112
• One (1) Adapter
• One (1) Allen Key

Bosch CLPK50-120 12 V Pocket Driver Applications:

• Flush Cutting 3/4" wood
• Cutting Drywall or wood
• Sanding various materials
• Scrapping paint, adhesives, etc.
• Grout Removal
• Drilling and Driving